Machine size: 44" x 29.5" x 23.2 (112 cm x 75cm x 59cm). Package size: 48.8'' x 33'' x 32.6'' (124cm x 84 cm x 83 cm). 7" Standard Z-depth and 8" Max Z-depth. F eatures & B enefits. S uper H igh S peed E ngraving.
The Monport 55W engraving speed (up to 800 mm/s) offers you more efficiency. H igh R esolution A nd H igh A ccuracy. Resolution up to 4500 dpi. LED headlights under the lid give point illumination for precision. 2.0 Focal distance provides higher resolution and etching of extremely small fonts.Built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise. S mart A nd U pgraded R uida D igital C ontroller. Controller like a brain, conducting the laser head, adjusting laser power and speed settings, file viewing, project framing and works well with laser software like RDWorks, Coreldraw, Auto-CAD and Lightburn etc laser engraver machine software. 2 USB & E thernet P orts.
Two USB ports allow more options including flash drive connectivity and a USB-to-USB PC connection. In addition, one ethernet port is also available for connection. Equipped with a transparent acrylic viewing window, it allows you to observe the laser engraving and cutting state. Plus, the dark sepia color protects you from indirect laser beam exposure.
R ed D ot G uidance. The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance. S mart S afety S ensor. The safety shutdown sensor helps stop the machine when opening the transparent window cover.
Once closed, press the "Enter" button to continue operation. M onport L aser S pecs. Works on Windows 7,8,10,11(64/32 bit), XP, 2000, and Vista. MacOS (Version 10.11 and higher) ONLY with LightBurn.
Supported with BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and other formats. Custom CO2 glass laser tube capable of continuous operation at 10,640 nm.
18mm Focal lens diameter & 2 Focal distance. Recommended engraving speed: 100 - 500mm/s.Recommended cutting speed: 1 - 30mm/s (actual speed depends on material). Light belt under the lid give point illumination for precise. Can safely engrave or cut any laser-compatible material like. Linear System - Custom extruded aluminum linear rails. Motion - Equipped with stepper X, Y, Z axis. Cooling - easy-to-setup water pump and hoses. Air Assist - Internal air assist with no external compressorrequired. Ventilation- expels smoke and fumes to keep safer. Recommended Operating Temperature: 60F-104F (16C-40C). Uses standard 110V AC power connection.
4-pin port connection for rotary axis devices. On all 55W laser machines and parts. 55W CO2 laser tube with an estimated lifetime of up to 2,000 operation hours depending on power setting usage and water cooling performance. PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows.Low Power 10-40% = 1,700-2,000 Hours. Moderate Power 40-70% = 1,300-1,500 Hours. High Power 70-100% = 800-1,000 Hours. 1 x Laser Engraver Machine. 1 x Ethernet to Ethernet Cable. 1 x USB Type-A to Type-A Cable.
1 x Venting Exhaust Duct 4 ft. 1 x USB Drive with Software. We have multiple warehouses located at CA and NJ. We will surely take care for u. All products are thoroughly inspected prior to dispatch.
We accept return of 14 days of receipt, please make sure the return item must be in original shape/packing and working order. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "areydsn" and is located in this country: US. This item can be shipped to United States.