2.0 Focal lens provides higher resolution and etching of extremely small fonts. Built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise.SMART AND UPGRADED RUIDA DIGITAL CONTROLLER. Controller like a brain, conducting the laser head, adjusting laser power and speed settings, file viewing, project framing and works well with laser software like RDWorks, Coreldraw, Auto-CAD and Lightburn. 2 USB ports allow more options including flash drive connectivity and a USB-to-USB PC connection. In addition, one ethernet port is also available for connection.
The autofocus pen senses the correct focus distance from the laser head to the target material -No more manual testing and adjustment! And signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height. Equipped with a transparent acrylic viewing window, it allows you to observe the laser engraving and cutting state.Plus, the dark sepia color protects you from indirect laser beam exposure. The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance. The safety shutdown sensor helps stop the machine when opening the transparent window cover. Once closed, press the "Enter" button to continue operation. Below the work platform, a debris collection system gathers the debris into a removable collection tray, keeping your machine as clean and clear.
Monport exterior: 57" x 43" x 34 (145cm x 110cm x 88cm). 24 in x 36 in (610 x 915 mm).8" Standard Z-depth and 9" Max Z-depth. Works on Windows 7,8,10 (64/32 bit), XP, 2000, and Vista. MacOS (Version 10.11 and higher) ONLY with LightBurn software.
Compatible with Coreldraw_laser, Auto-CAD_laser and lightburn. Supported with BMP, PLT, HPGL, GIF, JPG, JPEG, DXF, DST, AI, PDF, RD, SVG, TIFF, TGA and other formats. Custom CO2 glass laser tube capable of continuous operation at 10,640 nm. 18mm Focal lens diameter & 2.0 Focal lens. Recommended engraving speed: 100 - 500mm/s.
Recommended cutting speed: 1 - 30mm/s (actual speed depends on material). Headlights under the lid give point illumination for precise.
Can safely engrave or cut any laser-compatible material like. Linear System - Custom extruded aluminum linear rails. Motion - Equipped with stepper X, Y, Z axis. Cooling - easy-to-setup water pump and hoses.
Air Assist - Internal air assist with no external compressor. Ventilation- expels smoke and fumes to keep safer. Recommended Operating Temperature: 60F-104F (16C-40C). Uses standard 110V AC power connection.
4-Pin Port connection for rotary axis devices. 80W CO2 laser tube with an estimated lifetime of up to 8,000 operation hours depending on power setting usage and water cooling performance. PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows. Low Power 10-40% = 7,000-8,000 Hours. Moderate Power 40-70% = 5,000-6,500 Hours.High Power 70-100% = 3,000-4,000 Hours. 1 x Laser Engraver Machine. 1 x Ethernet to Ethernet Cable. 1 x USB Type-A to Type-A Cable.
1 x Venting Exhaust Duct 4 ft. 1 x USB Drive with Software. But remember to keep the item clean, intact with all labels, or we won't accept your request.This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "rwsopag" and is located in this country: US. This item can be shipped to United States.